This premium brass stock sheet is engineered for demanding pressure and temperature control systems. Its robust composition ensures reliability and longevity in critical industrial environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.278" |
| Length | 24" |
| Width | 31" |
A high-performance industrial component, this brass stock sheet is precisely manufactured to a thickness of 0.278 inches, with a generous length of 24 inches and a width of 31 inches. Composed of a high-grade brass alloy, it exhibits excellent thermal conductivity, corrosion resistance, and machinability, making it ideal for components requiring precise dimensional stability under varying temperature and pressure loads. Its inherent properties facilitate effective heat transfer and prevent material degradation in corrosive media, ensuring optimal performance in control valves, regulators, and heat exchangers.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation area is clean and free of debris. 2. Precisely cut the brass stock sheet to the required dimensions for the component. 3. Securely fasten or integrate the fabricated component into the pressure or temperature control system according to design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to burrs or deformation. | Employ sharp, appropriate cutting tools designed for brass to maintain precise edges and prevent material stress. |
| Inadequate consideration of thermal expansion in design. | Factor in the coefficient of thermal expansion of brass when designing components that will experience significant temperature fluctuations to prevent stress or failure. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Pressure Regulator Components, Temperature Control Valve Bodies, Heat Exchanger Plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||