This high-grade brass stock sheet is engineered for superior performance in critical pulling and lifting operations. Its robust construction and inherent material properties ensure reliability under demanding industrial conditions.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.265" |
| Length | 29" |
| Width | 34" |
A high-performance industrial component, this brass stock sheet boasts a substantial thickness of 0.265 inches, a generous length of 29 inches, and a width of 34 inches. Fabricated from industrial-grade brass, it offers exceptional corrosion resistance, high tensile strength, and excellent machinability, making it ideal for custom fabrication of components such as pulleys, sheaves, and structural elements in pulling and lifting equipment. Its non-sparking characteristics are also beneficial in hazardous environments. The precise dimensions ensure seamless integration into complex machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify the stock sheet meets all design specifications for the intended application. 2. Precisely cut and machine the brass to the required dimensions and tolerances. 3. Smooth all edges and surfaces to prevent stress risers and ensure safe handling.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass alloys where specific strength or corrosion resistance is required. | Always consult material datasheets and select a brass alloy specifically rated for the environmental conditions and mechanical stresses of the pulling and lifting application. |
| Inadequate edge finishing after cutting. | Thoroughly deburr and smooth all cut edges to prevent premature wear on adjacent components and ensure operator safety. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom fabricated sheaves and pulleys, Structural components in lifting frames, Wear plates and guide elements in pulling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||