Engineered for exceptional performance in pressure and temperature control, this brass stock sheet offers robust durability and excellent thermal conductivity. Its substantial thickness ensures integrity in demanding industrial settings.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.241" |
| Length | 46" |
| Width | 20" |
Purpose-built for heavy-duty applications, this brass stock sheet boasts a precise thickness of 0.241 inches, a generous length of 46 inches, and a width of 20 inches. Crafted from high-grade brass, it exhibits superior corrosion resistance and excellent thermal conductivity, making it ideal for components within pressure and temperature control systems. The material's inherent strength and malleability allow for intricate fabrication and reliable performance under extreme operating conditions, ensuring consistent functionality and longevity in demanding industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation area is clean and free of debris. 2. Accurately cut the brass stock sheet to the required dimensions for the specific component. 3. Fabricate and install the component according to the system's design specifications, ensuring secure fittings and proper sealing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong grade of brass for the specific pressure or temperature requirements. | Always verify the brass alloy's suitability for the intended operational parameters, consulting material data sheets and relevant industry standards. |
| Inadequate preparation of the sheet before cutting or fabrication, leading to uneven edges or material stress. | Properly support the sheet during cutting and avoid applying excessive force that could deform the material or create stress risers. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Pressure vessel fabrication, Heat exchanger components, Temperature regulation manifolds.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||