This premium brass stock sheet is engineered for demanding pressure and temperature control systems. Its precise dimensions and robust material properties ensure reliable performance in critical applications.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.235" |
| Length | 28" |
| Width | 18" |
Specified by design engineers worldwide, this brass stock sheet offers exceptional dimensional stability and material integrity for critical pressure and temperature control applications. Manufactured from high-grade brass, it exhibits excellent thermal conductivity and corrosion resistance, crucial for maintaining system efficiency and longevity. The substantial 0.235" thickness provides the necessary structural robustness for high-pressure environments, while the generous 28" x 18" dimensions offer ample material for custom fabrication of components like diaphragms, valve seats, and heat exchanger plates.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the brass stock sheet is clean and free of debris. 2. Precisely cut the sheet to the required component dimensions using appropriate tooling. 3. Fabricate and integrate the component into the pressure/temperature control system according to design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or improperly dimensioned components. | Always verify that all cut and fabricated parts precisely match the design engineer's specifications for optimal performance and safety. |
| Allowing contamination or surface damage during handling and fabrication. | Maintain a clean work environment and use appropriate protective measures during cutting and forming to prevent material compromise. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Pressure regulator diaphragms, Valve components for temperature control, Heat exchanger plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||