This high-performance brass stock sheet is engineered for critical pulling and lifting applications. Its robust composition ensures superior strength and longevity in demanding industrial environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.223" |
| Length | 46" |
| Width | 45" |
Precision-manufactured to tight tolerances, this brass stock sheet measures 0.223 inches in thickness, with dimensions of 46 inches in length and 45 inches in width. Composed of high-grade brass, it exhibits excellent tensile strength, ductility, and inherent corrosion resistance, making it ideal for environments where exposure to moisture or corrosive agents is a concern. The alloy's non-sparking properties also contribute to its suitability for potentially hazardous atmospheres. This material is designed to withstand significant mechanical stress and repeated use in pulling and lifting mechanisms.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Position the brass stock sheet according to the design specifications of the pulling or lifting apparatus. 3. Secure the sheet using appropriate fasteners, ensuring even pressure distribution to prevent stress concentrations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners that may corrode in the same environment as the brass. | Utilize stainless steel or other corrosion-resistant fasteners compatible with brass. |
| Over-tightening fasteners, leading to potential deformation or cracking of the brass sheet. | Employ torque wrenches to adhere to specified tightening limits and ensure even load distribution. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Reinforcement plates for hoists and winches, Wear surfaces in pulley systems, Structural components in custom lifting jigs.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||