This high-quality brass stock sheet, measuring 0.221" thick, 41" in length, and 47" in width, is engineered for exceptional durability and non-sparking performance in pulling and lifting applications.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.221" |
| Length | 41" |
| Width | 47" |
Engineered for reliability and performance, this brass stock sheet offers superior tensile strength and a high degree of corrosion resistance, making it ideal for harsh environments. Its non-magnetic properties and low friction coefficient are critical for specialized pulling and lifting machinery. The precise dimensions of 0.221" (5.61mm) thickness, 41" (1041mm) length, and 47" (1194mm) width ensure consistent fitment and structural integrity in demanding industrial settings. Suitable for custom fabrication of components requiring electrical non-conductivity and spark resistance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean, dry, and free of debris. 2. Position the brass stock sheet according to design specifications, aligning all mounting points. 3. Secure the sheet using appropriate fasteners, torqued to manufacturer recommendations, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners that may corrode or weaken over time. | Utilize corrosion-resistant fasteners, such as stainless steel or brass, that are compatible with the operating environment. |
| Improperly supporting the sheet, leading to flexing or premature failure. | Ensure adequate structural support is provided beneath the sheet, especially for larger spans or applications with significant load bearing. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom fabrication of guide rails for lifting equipment, Non-sparking components in hazardous material handling, Wear plates and friction surfaces in pulling mechanisms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||