This high-grade brass stock sheet offers superior machinability and excellent corrosion resistance, making it ideal for demanding fabrication and industrial applications where durability and conductivity are paramount.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.189" |
| Length | 43" |
| Width | 48" |
Precision-manufactured to tight tolerances, this brass stock sheet features a nominal thickness of 0.189 inches (4.8mm), with a standard width of 48 inches (1219.2mm) and a length of 43 inches (1092.2mm). Composed of a copper-zinc alloy, it exhibits excellent thermal and electrical conductivity, along with good tensile strength and ductility. Its inherent resistance to corrosion and tarnishing makes it suitable for a wide array of environmental conditions and applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the fabrication area is clean and free of debris. 2. Measure and mark the brass sheet according to design specifications using a carbide scribe or marker. 3. Cut the sheet using appropriate metal cutting tools such as a shear, bandsaw, or plasma cutter, ensuring smooth edges.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull cutting tools, resulting in burrs and uneven edges. | Employ sharp, high-quality cutting tools specifically designed for sheet metal to ensure clean cuts and minimize post-processing. |
| Improper storage leading to scratching or oxidation of the surface. | Store sheets flat on a clean, dry surface, ideally with protective film intact or interleaf paper between sheets to prevent surface damage. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Electrical connectors and components, Decorative fabrication and architectural elements, Heat exchangers and plumbing fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||