This high-grade brass stock sheet, precisely manufactured to 0.188" thickness, offers superior corrosion resistance and durability. It's an essential component for robust hydraulic system fabrication.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.188" |
| Length | 27" |
| Width | 14" |
Specified by design engineers worldwide, this brass stock sheet (0.188" thickness, 27" length, 14" width) is manufactured from C36000 free-machining brass. Its excellent machinability, formability, and inherent resistance to dezincification corrosion make it ideal for complex hydraulic manifold construction, valve components, and fittings. The material's strength-to-weight ratio and thermal conductivity are critical for efficient heat dissipation and reliable performance under pressure, ensuring long-term operational integrity in demanding fluid power systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the fabrication area is clean and free of contaminants. 2. Cut the brass sheet to the required dimensions using appropriate machining techniques. 3. Deburr all edges to prevent stress concentration and ensure smooth material flow.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for brass, leading to poor edge quality and increased tool wear. | Employ carbide-tipped or high-speed steel cutting tools specifically recommended for machining brass to achieve clean, precise cuts. |
| Improper handling leading to surface scratching or bending of the thin sheet. | Utilize protective coverings during transport and handling, and support the sheet adequately to prevent deformation. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Hydraulic Manifold Blocks, Hydraulic Valve Bodies, Custom Hydraulic Fittings, Pressure Vessel Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||