This premium brass stock sheet, engineered for durability, offers superior corrosion resistance and non-sparking characteristics. Its robust construction makes it ideal for critical pulling and lifting applications.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.167" |
| Length | 47" |
| Width | 40" |
Built to exacting engineering tolerances, this brass stock sheet boasts a precise thickness of 0.167 inches, a substantial length of 47 inches, and a width of 40 inches. Manufactured from high-grade brass, it exhibits excellent tensile strength and fatigue resistance, crucial for load-bearing components. Its inherent non-sparking nature makes it a safe choice for hazardous environments where ignition sources must be mitigated, ensuring operational safety and compliance in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation area is clean and free of debris. 2. Precisely cut the brass stock sheet to the required dimensions for the pulling or lifting apparatus. 3. Securely fasten the cut brass component using appropriate, corrosion-resistant hardware, ensuring proper load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel fasteners which can corrode and compromise structural integrity. | Utilize stainless steel or brass-compatible fasteners to prevent galvanic corrosion and maintain a strong bond. |
| Improperly supporting the sheet during cutting, leading to deformation or inaccuracies. | Employ a stable cutting surface and support the brass sheet adequately to maintain its flatness and dimensional accuracy. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Component fabrication for specialized hoists and winches, Non-sparking structural elements in offshore or petrochemical lifting gear, Custom fixtures for material handling in corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||