Engineered for robust performance, this brass stock sheet provides exceptional strength and corrosion resistance for critical pulling and lifting equipment.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.167" |
| Length | 17" |
| Width | 33" |
A high-performance industrial component, this brass stock sheet is precisely manufactured to a thickness of 0.167 inches, with a generous length of 17 inches and a width of 33 inches. Composed of high-grade brass, it exhibits excellent tensile strength, a high melting point, and superior resistance to corrosion and galvanic action, making it ideal for environments exposed to moisture or corrosive agents. Its density and inherent ductility allow for reliable fabrication and integration into complex pulling and lifting systems where mechanical integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of contaminants. 2. Position the brass stock sheet according to the design specifications for the pulling or lifting apparatus. 3. Securely fasten the sheet using appropriate industrial-grade fasteners, ensuring uniform load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, leading to deformation of the brass sheet. | Use a torque wrench to tighten fasteners to the manufacturer's recommended specifications. |
| Using incompatible lubricants or coatings that can degrade brass over time. | Consult material compatibility charts and use lubricants and coatings specifically approved for brass alloys. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom components for winches and hoists, Reinforcement plates for pulley systems, Fabrication of specialized lifting lugs.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||