This high-grade brass stock sheet offers superior strength and corrosion resistance, ideal for demanding pulling and lifting applications. Its robust construction ensures long-term operational integrity and safety in industrial environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.163" |
| Length | 38" |
| Width | 24" |
Engineered for reliability and performance, this brass stock sheet boasts a precise thickness of 0.163 inches, a substantial length of 38 inches, and a generous width of 24 inches. Manufactured from high-purity brass, it exhibits excellent tensile strength and a high melting point, making it suitable for environments exposed to corrosive elements. Its inherent non-sparking properties also contribute to safety in potentially hazardous areas. This material is specifically chosen for its durability and load-bearing capabilities in critical pulling and lifting systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Accurately position the brass stock sheet according to design specifications. 3. Securely fasten the sheet using appropriately rated hardware, ensuring even load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners that do not adequately support the load. | Always utilize fasteners that are rated for the expected load capacity and are of a size commensurate with the sheet's dimensions and application. |
| Improper surface preparation leading to uneven stress distribution. | Thoroughly inspect and prepare the mounting surface to ensure it is flat, clean, and capable of uniformly bearing the applied forces. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Reinforcement plates for lifting equipment, Structural components in winches and hoists, Wear pads for pulley systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||