This high-quality brass stock sheet, precisely manufactured to exacting standards, offers superior corrosion resistance and excellent machinability. Ideal for a wide range of industrial, decorative, and DIY projects requiring durability and aesthetic appeal.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.137" |
| Length | 21" |
| Width | 24" |
Specified by design engineers worldwide, this brass stock sheet is manufactured to meet stringent dimensional tolerances. With a thickness of 0.137 inches, a length of 21 inches, and a width of 24 inches, it provides a substantial and consistent material for fabrication. The inherent properties of brass, including its excellent conductivity, malleability, and resistance to dezincification, make it suitable for demanding applications in electrical components, decorative architectural elements, marine hardware, and musical instruments. Its golden hue and workability ensure both functional integrity and aesthetic value in finished products.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work surface is clean and stable. 2. Accurately measure and mark cut lines on the brass sheet. 3. Utilize appropriate cutting tools (e.g., shears, saws) for precise shaping.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to jagged edges. | Employ shear blades or metal-cutting saws specifically designed for brass to achieve clean, precise cuts. |
| Applying excessive force during bending or forming, causing material fatigue. | Utilize controlled bending techniques and consider annealing if significant deformation is required to prevent cracking. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Electrical Connectors and Components, Decorative Architectural Trim, Marine Hardware and Fixtures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||