This high-performance brass stock sheet is specifically designed for demanding hydraulic applications. Its robust construction ensures excellent sealing and durability in fluid power systems.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.123" |
| Length | 29" |
| Width | 32" |
Engineered for reliability and performance, this 0.123" thick brass stock sheet is manufactured to precise tolerances, measuring 29" in length and 32" in width. Composed of a corrosion-resistant brass alloy, it exhibits excellent machinability and strength, making it ideal for fabricating critical hydraulic components such as manifold blocks, valve plates, and custom fittings. Its inherent resistance to various hydraulic fluids and operating pressures ensures long-term operational integrity and minimizes leak potential in demanding environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the brass stock sheet is clean and free of debris. 2. Precisely cut the sheet to the required dimensions using appropriate tooling. 3. Smooth all cut edges to prevent stress risers and ensure proper mating surfaces.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass alloys not rated for hydraulic pressures. | Always select brass alloys specifically designated for hydraulic service, ensuring sufficient tensile strength and corrosion resistance. |
| Inadequate edge preparation after cutting. | Thoroughly deburr and smooth all cut edges to prevent premature wear or seal failure. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Hydraulic manifold construction, Custom hydraulic fittings and adapters, Valve plate fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||