This premium brass stock sheet is engineered for demanding heating and cooling applications. Its superior thermal conductivity and corrosion resistance make it an ideal choice for heat exchangers, piping, and critical HVAC components requiring reliability.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.121" |
| Length | 18" |
| Width | 23" |
Specified by design engineers worldwide, this brass stock sheet offers exceptional performance in thermal management systems. Measuring 0.121 inches in thickness, 18 inches in length, and 23 inches in width, it provides a substantial material volume for fabrication. The inherent properties of brass, including excellent thermal conductivity (approximately 120 W/m·K) and good corrosion resistance, ensure efficient heat transfer and long service life in HVAC environments. This material is readily machinable and formable, allowing for precise component creation for heat exchangers, fluid conduits, and specialized climate control modules.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Apply appropriate sealant or flux as per system design. 3. Securely fasten the brass sheet using approved mechanical fasteners or welding techniques.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to poor heat transfer or leaks. | Thoroughly clean all mating surfaces to ensure optimal contact and seal integrity. |
| Using incompatible sealants or welding consumables that can corrode brass. | Consult material compatibility charts and use only specified sealants and welding materials designed for brass. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Heat Exchanger Fabrication, HVAC Piping Systems, Component Manifolds for Climate Control.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||