This robust brass stock sheet is engineered for demanding pressure and temperature control systems. Its precise dimensions and inherent brass properties ensure reliable performance in critical industrial environments.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.116" |
| Length | 20" |
| Width | 36" |
Purpose-built for heavy-duty applications, this brass stock sheet offers superior durability and corrosion resistance, essential for pressure and temperature control components. Measuring 0.116 inches in thickness, 20 inches in width, and 36 inches in length, it meets stringent industrial standards for material integrity and dimensional accuracy. Brass's excellent thermal conductivity and non-sparking characteristics make it ideal for valve bodies, heat exchangers, and manifold construction where precise fluid and temperature management is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean all mating surfaces thoroughly to remove any contaminants. 2. Position the brass sheet precisely according to design specifications. 3. Secure the sheet using appropriate fasteners or welding techniques as dictated by the application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using improper fasteners that can cause galvanic corrosion with brass. | Utilize stainless steel or brass fasteners exclusively to prevent dissimilar metal reactions. |
| Insufficient surface preparation leading to leaks or poor adhesion. | Ensure all surfaces are meticulously cleaned and free from oils, dirt, or oxidation before installation. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Pressure regulator components, Temperature control valve housings, Heat exchanger plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||