This brass stock sheet is engineered for demanding pressure and temperature control applications. Its robust composition ensures reliable performance in critical industrial environments, offering superior durability and corrosion resistance.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.109" |
| Length | 14" |
| Width | 23" |
Purpose-built for heavy-duty applications, this brass stock sheet measures 0.109 inches in thickness, 14 inches in width, and 23 inches in length. Fabricated from high-grade brass, it exhibits excellent thermal conductivity and resistance to a wide range of corrosive media, making it ideal for use in heat exchangers, pressure vessels, and control valve components. The material's inherent strength and malleability allow for precise fabrication and long-term operational integrity in challenging industrial settings. Its specific alloy composition is optimized for stability under fluctuating pressure and temperature conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of contaminants. 2. Precisely cut the brass sheet to the required dimensions using appropriate tooling. 3. Securely fasten the cut brass component to the assembly, ensuring proper sealing for pressure containment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using insufficient thickness for the intended pressure rating. | Consult engineering drawings and pressure charts to verify the appropriate brass sheet thickness for the application's maximum operating pressure. |
| Improper surface preparation leading to poor joint integrity. | Thoroughly clean and degrease all mating surfaces before assembly to ensure a reliable seal. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Heat Exchanger Plates, Pressure Vessel Linings, Control Valve Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||