This brass stock sheet provides robust performance for critical pulling and lifting operations. Its superior corrosion resistance and durable nature make it ideal for environments where reliability is paramount.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.101" |
| Length | 23" |
| Width | 18" |
Manufactured under strict quality controls, this brass stock sheet measures 0.101 inches in thickness, 23 inches in length, and 18 inches in width. Composed of a high-grade brass alloy, it exhibits excellent tensile strength and resilience, making it suitable for dynamic load-bearing scenarios. The material's inherent non-sparking properties also lend themselves to applications within potentially flammable environments. Rigorous testing ensures dimensional accuracy and material integrity for consistent performance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of debris. 2. Position the sheet accurately according to design specifications. 3. Secure the sheet using appropriate fastening methods for the intended application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect fasteners that may corrode or fail. | Utilize fasteners made from compatible, corrosion-resistant materials such as stainless steel or a higher-grade brass. |
| Overloading the sheet beyond its calculated load-bearing capacity. | Always perform load calculations based on the specific application and ensure the brass sheet's capabilities are not exceeded. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Component in specialized lifting apparatus, Reinforcement plate for pulling mechanisms, Custom fabricated structural elements in marine or corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||