This premium brass stock sheet is engineered for critical hydraulic systems. Its robust composition ensures superior performance and longevity in demanding environments, offering excellent corrosion resistance.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.095" |
| Length | 24" |
| Width | 29" |
Precision-manufactured to tight tolerances, this 0.095-inch thick brass stock sheet measures 24 inches in length and 29 inches in width. Crafted from high-grade brass, it exhibits excellent machinability, inherent corrosion resistance to hydraulic fluids and environmental factors, and good thermal conductivity. This composition makes it ideal for fabricating custom hydraulic manifold blocks, fittings, valve bodies, and specialized seal components where dimensional accuracy and material integrity are paramount for leak-free operation and sustained performance under pressure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Carefully inspect the brass stock sheet for any damage or imperfections before cutting. 2. Precisely cut the sheet to the required dimensions using appropriate metal cutting tools. 3. Smooth all cut edges to prevent burrs that could compromise sealing or fluid flow.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools which can lead to excessive heat and deformation. | Employ carbide-tipped or specialized non-ferrous metal cutting tools for clean, precise cuts with minimal heat generation. |
| Failing to deburr edges, leading to potential leaks or damage to seals. | Thoroughly deburr all cut edges with a file or chamfering tool after cutting. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom Hydraulic Manifold Blocks, Hydraulic Fittings and Adapters, Valve Bodies and Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||