This premium brass stock sheet, precisely manufactured to 0.081" thickness, 33" length, and 31" width, offers exceptional performance in hydraulic applications.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.081" |
| Length | 33" |
| Width | 31" |
Manufactured under strict quality controls, this brass stock sheet (0.081" x 33" x 31") is engineered for superior durability and corrosion resistance. Its brass composition provides excellent machinability and a high yield strength, essential for components within hydraulic systems that experience pressure fluctuations and fluid exposure. The material's inherent non-sparking properties are also a critical safety consideration in many industrial hydraulic environments, ensuring reliability and longevity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the brass sheet is clean and free of contaminants. 2. Accurately cut the sheet to the required dimensions using appropriate metal cutting tools. 3. Smooth all edges to prevent burrs and ensure a secure fit within the hydraulic assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong alloy of brass for high-pressure hydraulic lines. | Verify the specific brass alloy's tensile strength and pressure rating against the hydraulic system's requirements. |
| Inadequate edge preparation leading to leaks. | Thoroughly deburr and chamfer all cut edges before installation to ensure a proper seal. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Hydraulic manifold blocks, Custom hydraulic fittings, Hydraulic system enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||