This high-grade brass stock sheet is engineered for robust performance in pulling and lifting scenarios. Its superior corrosion resistance and non-sparking properties make it ideal for demanding industrial environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.080" |
| Length | 43" |
| Width | 24" |
Precision-manufactured to tight tolerances, this brass stock sheet measures 0.080 inches in thickness, 43 inches in length, and 24 inches in width. Composed of a high-copper alloy, it offers excellent tensile strength and formability while providing inherent resistance to galvanic corrosion and ensuring non-sparking characteristics essential for hazardous environments. The material's machinability allows for custom fabrication of components such as custom sheaves, guide rollers, and reinforcing plates within lifting equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean and free of debris. 2. Carefully align the brass stock sheet with the intended mounting points. 3. Secure the sheet using appropriate fasteners, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel fasteners which can lead to galvanic corrosion. | Utilize brass or stainless steel fasteners compatible with the brass sheet to prevent corrosion. |
| Over-tightening fasteners, which can deform the sheet. | Apply fasteners evenly and to the recommended torque specification for the application. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom sheave fabrication for winches and hoists, Reinforcing plates for lifting slings and rigging hardware, Guide rollers and spools in material handling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||