This brass stock sheet is engineered for exceptional performance in demanding pulling and lifting scenarios. Its robust brass composition ensures reliable strength and longevity under significant stress.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.069" |
| Length | 43" |
| Width | 23" |
Purpose-built for heavy-duty applications, this brass stock sheet measures 0.069 inches in thickness, spanning 43 inches in length and 23 inches in width. Fabricated from high-grade brass, it offers a superior combination of tensile strength, corrosion resistance, and non-sparking properties, making it ideal for environments where safety and durability are paramount. This material is specifically selected for its ability to withstand high loads and resist wear in demanding pulling and lifting operations, ensuring operational integrity and extended service life.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and condition prior to cutting or fabrication. 2. Utilize appropriate cutting tools designed for brass to achieve precise shapes. 3. Integrate fabricated components securely into your pulling or lifting system using approved fastening methods.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools which can cause excessive heat and tool damage. | Employ specialized carbide or HSS cutting tools specifically designed for non-ferrous metals like brass to ensure clean cuts and prolong tool life. |
| Insufficient consideration of load-bearing capacity in the design phase. | Always consult engineering load charts and conduct stress analysis to ensure the brass sheet's capacity meets or exceeds the maximum anticipated load for the application. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom fabricated lifting eyes and brackets, Reinforcement plates for heavy-duty pulleys, Components for specialized winching mechanisms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||