This industrial-grade brass stock sheet offers excellent machinability and corrosion resistance. Its precise dimensions make it suitable for a wide range of fabrication and repair tasks.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.040" |
| Length | 19" |
| Width | 40" |
A high-performance industrial component, this brass stock sheet is manufactured to exacting standards. With a nominal thickness of 0.040 inches, a width of 40 inches, and a length of 19 inches, it provides a substantial material platform for demanding applications. Brass, an alloy primarily composed of copper and zinc, offers superior electrical and thermal conductivity, excellent corrosion resistance, and good formability. These properties make it an ideal choice for electrical connectors, plumbing fittings, heat exchangers, and decorative architectural elements where durability and aesthetic appeal are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work surface is clean and stable. 2. Carefully measure and mark the desired cut lines on the brass sheet. 3. Using an appropriate cutting tool (e.g., shear, saw), make precise cuts along the marked lines. 4. Deburr all cut edges to ensure a smooth finish and prevent potential hazards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using an incorrect cutting tool, leading to ragged edges or material deformation. | Employ a cutting tool specifically designed for sheet metal, such as a power shear or a fine-tooth metal-cutting saw. |
| Failing to deburr edges, resulting in sharp burrs that can cause injury or damage to other components. | Always use a deburring tool or a fine-grit file to smooth all cut edges thoroughly. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Electrical connectors and contacts, Plumbing fittings and valves, Heat exchangers and radiators, Decorative trim and architectural elements, Hobbyist and DIY fabrication projects.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||