This precision brass stock sheet, measuring 0.035 inches thick, 32 inches long, and 26 inches wide, offers exceptional performance in pressure and temperature control applications. Its inherent material properties ensure reliability and longevity.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.035" |
| Length | 32" |
| Width | 26" |
Trusted by engineers across multiple sectors, this brass stock sheet exemplifies superior material integrity for critical pressure and temperature control systems. With precise dimensions of 0.035" thickness, 32" length, and 26" width, it provides ample material for fabrication. Brass, known for its excellent corrosion resistance, thermal conductivity, and machinability, makes it an ideal choice for components within HVAC systems, plumbing manifolds, and intricate valve bodies where consistent performance under varying thermal and pressure loads is paramount. Its ductility allows for complex shaping without compromising structural integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the brass stock sheet is clean and free of contaminants. 2. Accurately cut the sheet to the required dimensions using appropriate metalworking tools. 3. Fabricate components according to engineering drawings, paying close attention to tolerances and joint preparation for welding or brazing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible joining methods (e.g., soldering dissimilar metals directly without proper flux and technique). | Utilize brass-specific solders, fluxes, and brazing alloys. Ensure surfaces are thoroughly cleaned and properly prepared for optimal bond strength. |
| Exposing the brass to highly aggressive acidic or alkaline environments without considering its chemical resistance limitations. | Verify the chemical compatibility of brass with the operating environment. For extreme conditions, consider protective coatings or alternative materials. |
A: This Brass Stock Sheet is manufactured from Brass.
A: HVAC System Components, Plumbing Manifolds & Fittings, Valve Bodies & Actuators.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||