This robust brass stock sheet is engineered for demanding pulling and lifting applications. Its specific dimensions and brass composition ensure reliable performance, strength, and resistance to corrosive environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.031" |
| Length | 40" |
| Width | 34" |
Built to exacting engineering tolerances, this brass stock sheet measures 0.031 inches in thickness, 40 inches in length, and 34 inches in width. Fabricated from high-grade brass alloy, it exhibits excellent tensile strength, ductility, and superior corrosion resistance, making it ideal for environments exposed to moisture or chemicals. Its non-sparking properties further enhance safety in hazardous areas.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Precisely position the brass stock sheet according to design specifications. 3. Securely fasten the sheet using appropriate industrial-grade fasteners or welding techniques, ensuring structural integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners that cannot support the load. | Employ fasteners with a tensile strength rating exceeding the maximum anticipated load, as specified by engineering calculations. |
| Inadequate surface preparation leading to poor adhesion or stress concentration. | Thoroughly degrease and abrade the mounting surface to ensure optimal contact and stress distribution. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Reinforcement plates for lifting lugs, Wear surfaces in pulley systems, Components in marine hardware.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||