This premium brass stock sheet, engineered for strength and resilience, is specifically designed for demanding pulling and lifting applications. Its robust construction ensures reliability in challenging environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.022" |
| Length | 29" |
| Width | 47" |
Precision-manufactured to tight tolerances, this brass stock sheet measures 0.022 inches in thickness, 29 inches in width, and 47 inches in length. Fabricated from high-grade brass alloy, it exhibits excellent tensile strength, superior corrosion resistance against various environmental factors, and non-sparking properties crucial for hazardous areas. The inherent ductility allows for forming and fabrication without compromising structural integrity, making it suitable for custom component creation in pulling and lifting systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mounting surface thoroughly to ensure optimal adhesion and prevent contamination. 2. Position the brass stock sheet according to the design specifications, verifying alignment. 3. Secure the sheet using appropriate fasteners and clamping methods as dictated by the application's load requirements and safety standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel fasteners which can lead to galvanic corrosion with brass. | Employ stainless steel or brass-compatible fasteners to prevent dissimilar metal corrosion and maintain structural integrity. |
| Over-stressing the material beyond its yield strength during bending or forming. | Consult material datasheets for appropriate bending radii and utilize controlled forming processes to avoid material fatigue or fracture. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom sheave and pulley components for winch systems, Reinforcement plates for rigging and lifting slings, Fabricated guides and wear strips in material handling equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||