This 0.209" thick Aluminum 6061 stock sheet, measuring 35" x 13", is engineered for robust performance in hydraulic systems. Its superior strength-to-weight ratio and corrosion resistance make it ideal for critical components.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.209" |
| Length | 35" |
| Width | 13" |
Manufactured under strict quality controls, this Aluminum 6061 stock sheet boasts a nominal thickness of 0.209 inches, a length of 35 inches, and a width of 13 inches. 6061 aluminum alloy is a precipitation-hardened aluminum-magnesium-silicon alloy, renowned for its moderate to high strength, excellent corrosion resistance, good weldability, and formability. Its mechanical properties make it exceptionally suitable for fabricating components within hydraulic systems requiring structural integrity and resistance to fluid environments. This material is commonly employed in manifold blocks, mounting plates, and custom hydraulic fluid reservoirs where precision and durability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting area is clean and well-lit. 2. Precisely mark cut lines using a suitable marker. 3. Employ appropriate cutting tools (e.g., band saw, abrasive chop saw) with proper blade selection for aluminum. 4. Deburr all cut edges to remove sharp fragments and ensure smooth surfaces.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull or incorrect cutting blades, leading to rough edges and potential material damage. | Utilize sharp, carbide-tipped blades designed for aluminum cutting and maintain them regularly. |
| Failing to properly support the sheet during cutting, resulting in vibration and inaccurate cuts. | Ensure the stock sheet is securely clamped and adequately supported throughout the cutting process. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Hydraulic Manifold Blocks, Hydraulic Component Mounts, Custom Hydraulic Fluid Reservoirs.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||