This Aluminum 6061 stock sheet offers exceptional strength-to-weight ratio, making it a prime choice for robust pulling and lifting assemblies. Engineered for reliability and durability in critical applications.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.336" |
| Length | 36" |
| Width | 24" |
Specified by design engineers worldwide, this Aluminum 6061 stock sheet is manufactured to exacting tolerances. With a nominal thickness of 0.336 inches, a length of 36 inches, and a width of 24 inches, it provides substantial material for fabrication. The 6061 alloy offers excellent corrosion resistance, good weldability, and superior mechanical properties, including high tensile and yield strength, making it ideal for structural components in marine, aerospace, and industrial lifting equipment where performance and weight are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare mounting surfaces for optimal contact. 2. Secure sheet using appropriate fasteners and structural adhesives. 3. Conduct load testing to verify system integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, causing material deformation. | Use torque-limiting tools and follow recommended torque specifications for the fastener type and hole size. |
| Inadequate corrosion protection at joints or cut edges. | Apply suitable sealants or coatings to exposed aluminum surfaces, especially in corrosive environments. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Custom lifting fixtures, Structural supports for hoists, Reinforcement plates for winches.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||