This robust Aluminum 6061 stock sheet offers exceptional strength-to-weight characteristics, making it a prime choice for demanding pulling and lifting applications. Its corrosion resistance ensures longevity in various environments.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.616" |
| Length | 13" |
| Width | 29" |
Built to exacting engineering tolerances, this Aluminum 6061 stock sheet measures 0.616 inches thick, 13 inches in length, and 29 inches in width. Composed of a 6061 aluminum alloy, it exhibits a tensile strength of approximately 45,000 psi and a yield strength of 40,000 psi, making it suitable for moderate to heavy-duty pulling and lifting components. Its excellent weldability and formability allow for integration into complex assemblies. Commonly utilized in crane components, rigging hardware, and custom lifting fixtures where structural integrity and lightweight design are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect the stock sheet for any surface defects or dimensional deviations prior to cutting or machining. 2. Machine the sheet to the required dimensions and shape, adhering to design specifications for load-bearing integrity. 3. Integrate the fabricated component into the pulling or lifting system, ensuring all fasteners and connections are secured to applicable standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard aluminum alloys for high-stress lifting applications. | Always specify Aluminum 6061 or a comparable high-strength alloy for components subjected to significant loads in pulling and lifting scenarios. |
| Inadequate material thickness for the intended load capacity. | Perform a thorough stress analysis to determine the minimum required material thickness based on the maximum anticipated load and safety factors. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Crane and hoist components, Rigging hardware and attachments, Custom lifting fixtures and frames.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||