This robust Aluminum 6061 stock sheet offers exceptional strength and thermal performance. Precisely manufactured to 0.862" thickness, 46" length, and 27" width, it's engineered for demanding heating and cooling systems.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.862" |
| Length | 46" |
| Width | 27" |
Specified by design engineers worldwide, this Aluminum 6061 stock sheet (0.862" x 46" x 27") exhibits superior tensile and yield strength, crucial for structural integrity in thermal management solutions. Its excellent corrosion resistance and good weldability ensure longevity and ease of fabrication. The high thermal conductivity of Aluminum 6061 makes it an optimal material for heat exchangers, heat sinks, and other components where efficient heat transfer is paramount. This alloy meets rigorous industry standards for performance and reliability in demanding environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surface is clean and free of debris. 2. Position sheet accurately according to design specifications. 3. Secure using appropriate fasteners or welding techniques, adhering to structural load requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate surface preparation prior to bonding or welding. | Thoroughly degrease and abrade the surface to ensure optimal adhesion or weld penetration. |
| Overheating during welding, leading to reduced mechanical properties. | Employ proper welding procedures, including preheating and post-weld heat treatment if required, to maintain alloy strength. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Heat Exchanger Fabrication, Custom Heat Sink Manufacturing, Industrial Oven Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||