This Aluminum 6061 stock sheet is engineered for robust performance in pressure and temperature control systems. Its superior strength-to-weight ratio and excellent corrosion resistance make it ideal for critical industrial environments.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.909" |
| Length | 40" |
| Width | 12" |
A high-performance industrial component, this Aluminum 6061 stock sheet offers exceptional material properties for demanding pressure and temperature control applications. Measuring 0.909 inches thick, 40 inches in length, and 12 inches in width, its alloy composition provides excellent corrosion resistance, good machinability, and high strength, particularly after heat treatment. This makes it a preferred material for components within hydraulic systems, heat exchangers, and structural elements subjected to thermal cycling and pressure variations. Its weldability also allows for complex fabrication and integration into larger assemblies, ensuring reliable performance under stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Carefully position the Aluminum 6061 stock sheet, aligning all mounting holes or connection points. 3. Securely fasten the sheet using appropriate hardware, ensuring even torque distribution to prevent warping or damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, leading to deformation of the sheet. | Use a calibrated torque wrench and apply fasteners evenly in a cross pattern. |
| Using incompatible fasteners that may cause galvanic corrosion. | Select fasteners made from materials with similar or higher nobility than Aluminum 6061, such as stainless steel or anodized aluminum. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Heat Exchanger Components, Hydraulic Manifold Blocks, Pressure Vessel Liners.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||