This premium Aluminum 6061 stock sheet, precisely manufactured to 0.393" thickness, 40" length, and 13" width, offers exceptional strength and corrosion resistance for critical heating and cooling systems.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.393" |
| Length | 40" |
| Width | 13" |
Trusted by engineers across multiple sectors, this Aluminum 6061 stock sheet (0.393" x 40" x 13") exemplifies superior performance in thermal management. Its 6061 alloy composition provides an excellent balance of strength, ductility, and corrosion resistance, crucial for heat exchangers, ductwork, and structural components in HVAC. This material exhibits good weldability and machinability, facilitating complex fabrication processes. The precise dimensions ensure accurate fitment and optimal heat transfer efficiency within demanding heating and cooling environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean and free of debris. 2. Cut the aluminum sheet to the required dimensions using appropriate cutting tools. 3. Fabricate and join components according to design specifications, utilizing suitable welding or fastening methods.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to burrs or uneven edges. | Employ sharp, high-quality cutting tools specifically designed for aluminum, such as abrasive cut-off wheels or carbide-tipped blades. |
| Inadequate surface preparation before joining, compromising weld integrity or adhesive bond strength. | Thoroughly degrease and lightly abrade the joining surfaces to remove any oxide layers or contaminants. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Heat Exchanger Fabrication, HVAC Ductwork Components, Structural Brackets for Cooling Units.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||