This 0.467" thick Aluminum 6061 stock sheet is engineered for robust hydraulic system components. Its superior strength-to-weight ratio and corrosion resistance ensure reliable performance in demanding environments.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.467" |
| Length | 14" |
| Width | 25" |
Purpose-built for heavy-duty applications, this Aluminum 6061 stock sheet measures 0.467 inches in thickness, 14 inches in length, and 25 inches in width. Aluminum 6061 alloy offers excellent corrosion resistance, good weldability, and a high strength-to-weight ratio, making it ideal for fabricating critical hydraulic manifolds, structural components, and protective housings. This material's mechanical properties are well-suited to withstand the pressures and operational stresses inherent in hydraulic systems, ensuring longevity and operational integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the material is clean and free of contaminants before fabrication. 2. Utilize appropriate cutting and machining techniques for aluminum alloys. 3. Apply suitable joining methods (e.g., welding, bolting) according to system design requirements and material specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting speeds and feed rates for aluminum, leading to tool wear or poor surface finish. | Consult machining data for Aluminum 6061 to determine optimal cutting parameters for the specific tooling and operation. |
| Improper surface preparation prior to welding, resulting in porosity or lack of fusion. | Thoroughly degrease and remove any oxide layers from the weld joint area using appropriate cleaning agents and wire brushes. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Hydraulic Manifolds, Structural Brackets in Mobile Hydraulics, Protective Housings for Hydraulic Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||