This Aluminum 6061 stock sheet is engineered for demanding pressure and temperature control systems. Its precise dimensions and robust material properties ensure reliable performance in critical industrial environments.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.845" |
| Length | 26" |
| Width | 45" |
Precision-manufactured to tight tolerances, this Aluminum 6061 stock sheet measures 0.845 inches in thickness, 26 inches in length, and 45 inches in width. Alloy 6061 offers an excellent combination of strength, corrosion resistance, and weldability, making it ideal for heat exchangers, pressure vessels, and thermal management components. Its uniform composition ensures predictable thermal conductivity and structural integrity under varying pressure and temperature loads, minimizing risk of failure in critical control systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean, dry, and free from any debris or contaminants. 2. Carefully position the Aluminum 6061 stock sheet according to design specifications, aligning all connection points. 3. Secure the sheet using appropriate fastening methods, such as welding or mechanical fasteners, adhering to recommended torque values.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to poor seals or adhesion. | Thoroughly clean and degrease all mating surfaces with an approved solvent before installation. |
| Over-tightening fasteners, causing deformation or material fatigue. | Utilize a calibrated torque wrench and adhere strictly to the specified torque values for all fasteners. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Heat Exchanger Fabrication, Pressure Vessel Components, Thermal Management Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||