This high-performance Aluminum 6061 stock sheet offers superior strength-to-weight ratio and excellent corrosion resistance, making it ideal for critical hydraulic system components and fabrication.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.231" |
| Length | 34" |
| Width | 43" |
Manufactured under strict quality controls, this Aluminum 6061 stock sheet measures 0.231 inches thick, 34 inches in length, and 43 inches in width. Aluminum 6061 is a precipitation-hardened alloy known for its excellent strength, weldability, and corrosion resistance, making it a preferred material for robust hydraulic manifold blocks, fluid power components, and structural elements within fluid systems. Its balanced properties ensure reliability under pressure and in challenging environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting or machining process is performed with appropriate tooling for aluminum to maintain material integrity and achieve precise dimensions. 2. Clean all surfaces thoroughly to remove any debris or contaminants prior to assembly or further fabrication. 3. Verify dimensional accuracy against design specifications before proceeding with welding or joining operations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using inappropriate cutting tools that cause excessive heat or deformation. | Employ sharp, specialized aluminum cutting tools with adequate coolant to prevent thermal distortion and ensure clean cuts. |
| Inadequate surface preparation before welding or bonding. | Thoroughly degrease and abrade the surface to remove the oxide layer, ensuring optimal adhesion and weld quality. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Hydraulic Manifold Blocks, Fluid Power System Components, Pressure Vessel Fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||