This premium Aluminum 6061 stock sheet offers superior thermal conductivity and corrosion resistance, making it an ideal material for demanding heating and cooling system components.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.234" |
| Length | 41" |
| Width | 44" |
Built to exacting engineering tolerances, this Aluminum 6061 stock sheet (0.234" thickness, 41" length, 44" width) is manufactured from a precipitation-hardening aluminum alloy known for its excellent strength-to-weight ratio, weldability, and resistance to corrosion. Its inherent thermal conductivity makes it exceptionally suitable for heat exchangers, ductwork, and other thermal management applications within HVAC systems. The precise dimensions ensure seamless integration into engineered assemblies, minimizing fabrication time and material waste.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and material integrity against project specifications. 2. Prepare surfaces for joining or shaping according to application requirements. 3. Fabricate and install components using appropriate welding, fastening, or forming techniques.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to poor weld quality or adhesion. | Thoroughly clean all surfaces with a degreaser and mechanical abrasion to remove oxides and contaminants before joining or coating. |
| Overheating during welding, causing loss of mechanical properties in the heat-affected zone. | Utilize appropriate welding procedures and filler metals for 6061-T6 aluminum, and consider post-weld heat treatment if maximum strength is critical. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Heat Exchanger Fabrication, HVAC Ducting Systems, Thermal Management Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||