This 0.625" thick Aluminum 6061 stock sheet, measuring 17" x 28", offers exceptional strength and corrosion resistance, ideal for robust pulling and lifting assemblies.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.625" |
| Length | 17" |
| Width | 28" |
Specified by design engineers worldwide, this Aluminum 6061 stock sheet is manufactured to exacting tolerances. Its 0.625" thickness, 17" length, and 28" width provide a substantial platform for structural integrity in high-stress scenarios. Composed of alloy 6061, it exhibits excellent mechanical properties including a high tensile strength and yield strength, coupled with superior corrosion resistance due to its aluminum base and the presence of magnesium and silicon. This makes it a preferred material for custom fabrication of lifting lugs, spreader bars, and component supports where weight optimization is critical without compromising load-bearing capacity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the intended mounting surface is clean and free of contaminants. 2. Precisely align the stock sheet with the planned fixture points. 3. Securely fasten the stock sheet using appropriate grade hardware and torque specifications relevant to the application's load requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-torquing fasteners, leading to deformation of the aluminum sheet. | Utilize a calibrated torque wrench and adhere to recommended torque values for the specific fastener size and material. |
| Using incompatible fasteners (e.g., steel bolts without isolation) causing galvanic corrosion. | Employ fasteners made from compatible materials (e.g., stainless steel or aluminum alloys) or use insulating washers and compounds when fastening dissimilar metals. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Custom Lifting Fixtures, Spreader Bar Components, Structural Support Plates for Hoists.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||