This Aluminum 6061 stock sheet is a premium material engineered for demanding pressure and temperature control applications. Its superior strength-to-weight ratio and excellent corrosion resistance make it a reliable choice for critical components.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.162" |
| Length | 37" |
| Width | 16" |
Specified by design engineers worldwide, this Aluminum 6061 stock sheet offers a nominal thickness of 0.162 inches, a length of 37 inches, and a width of 16 inches. Conforming to industry standards for 6061 aluminum alloy, it exhibits excellent weldability and formability. Its inherent corrosion resistance and moderate to high strength make it suitable for components exposed to varying pressures and temperatures, ensuring structural integrity and longevity in demanding environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material specifications and dimensions against design requirements. 2. Ensure the mounting surface is clean, flat, and free of contaminants. 3. Securely fasten the sheet using appropriate fasteners, ensuring even distribution of load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a lower grade aluminum for critical pressure applications. | Always specify and use Aluminum 6061 or a higher-grade alloy for pressure-containing components to ensure safety and performance. |
| Improper welding techniques leading to reduced strength. | Employ TIG or MIG welding with appropriate filler metals (e.g., 4043 or 5356) and follow recommended procedures for 6061 aluminum to maintain mechanical properties. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Pressure vessel components, Heat exchanger plates, Temperature regulation manifolds, Chassis and frames for control systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||