This Aluminum 6061 stock sheet provides robust performance for demanding pressure and temperature control systems. Its excellent mechanical properties and formability make it a superior choice for custom fabrication.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.275" |
| Length | 25" |
| Width | 30" |
Manufactured under strict quality controls, this Aluminum 6061 stock sheet boasts a precise thickness of 0.275 inches, a length of 25 inches, and a width of 30 inches. Aluminum 6061 is a precipitation-hardened alloy known for its good strength, excellent corrosion resistance, weldability, and machinability. These characteristics make it highly suitable for components within pressure vessels, heat exchangers, and thermal management systems where reliability under varying thermal and pressure loads is critical. Its balanced properties ensure structural integrity and longevity in operational environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants. 2. Precisely cut the Aluminum 6061 sheet to the required dimensions using appropriate cutting tools. 3. Fabricate and assemble components according to design specifications, employing suitable joining methods like welding or mechanical fastening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to burrs or uneven edges. | Utilize carbide-tipped blades or waterjet cutting for clean, precise edges. |
| Inadequate surface preparation before joining or coating. | Thoroughly degrease and abrade the surface to ensure proper adhesion of welds, coatings, or sealants. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Pressure vessel fabrication, Heat exchanger components, Thermal management system housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||