This robust Aluminum 6061 stock sheet provides exceptional strength and corrosion resistance for critical hydraulic system components. Its precise dimensions ensure seamless integration and reliable performance under pressure.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.619" |
| Length | 35" |
| Width | 39" |
A high-performance industrial component, this Aluminum 6061 stock sheet, measuring 0.619 inches in thickness, 35 inches in length, and 39 inches in width, is engineered for demanding hydraulic applications. Composed of Aluminum alloy 6061, it exhibits a superior balance of strength, formability, and corrosion resistance due to its precipitation-hardened nature. This material's excellent weldability and machinability make it suitable for fabrication of complex hydraulic manifolds, fluid reservoirs, and structural supports where reliability and longevity are paramount. Its inherent lightweight properties also contribute to overall system efficiency.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean all mating surfaces thoroughly to remove any debris or contaminants. 2. Ensure proper alignment of the sheet with existing or intended hydraulic system components. 3. Secure the sheet using appropriate fasteners and sealing methods as per hydraulic system design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to leaks. | Always degrease and ensure mating surfaces are free of burrs or damage before assembly. |
| Over-tightening fasteners, causing material deformation. | Adhere to specified torque values for all fasteners to prevent stress concentrations. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Hydraulic Manifold Fabrication, Fluid Reservoir Construction, Structural Components for Hydraulic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||