This premium Aluminum 6061 stock sheet offers exceptional strength and machinability, making it the ideal choice for fabricating robust hydraulic components and manifold systems requiring superior performance and longevity.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.456" |
| Length | 29" |
| Width | 30" |
Engineered for reliability and performance, this Aluminum 6061 stock sheet boasts a thickness of 0.456 inches, a length of 29 inches, and a width of 30 inches. Its alloy composition provides excellent corrosion resistance and a favorable strength-to-weight ratio, crucial for hydraulic systems where efficiency and durability are paramount. The material's inherent properties allow for precise machining, enabling the creation of complex manifold designs, cylinder components, and structural elements within hydraulic equipment. This sheet is suitable for a wide range of operating pressures and environmental conditions typically encountered in industrial hydraulics.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of debris prior to fabrication. 2. Utilize appropriate cutting and machining tools designed for aluminum alloys. 3. Follow industry-standard welding or joining procedures if required for your application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools which can lead to poor edge quality and increased waste. | Employ carbide-tipped saw blades or end mills specifically designed for aluminum to achieve clean, precise cuts. |
| Insufficient pre-cleaning before welding, leading to weld porosity and reduced joint strength. | Thoroughly degrease and mechanically clean the joint surfaces with stainless steel wire brushes prior to any welding operations. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Hydraulic Manifold Blocks, Cylinder Components, Hydraulic System Housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||