This robust Aluminum 6061 stock sheet offers exceptional strength-to-weight ratio. Precisely manufactured to 0.465" thickness, 12" width, and 34" length, it's engineered for reliable performance in critical pulling and lifting scenarios.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.465" |
| Length | 12" |
| Width | 34" |
Specified by design engineers worldwide, this Aluminum 6061 stock sheet delivers superior mechanical properties. Exhibiting a minimum yield strength of 35,000 psi and tensile strength of 38,000 psi, its T6 temper ensures optimal hardness and formability. The alloy's excellent corrosion resistance and weldability make it a prime choice for marine, aerospace, and structural components. Precise dimensions of 0.465" thickness, 12" width, and 34" length ensure interchangeability and fit within complex assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and material integrity before use. 2. Ensure proper surface preparation for any joining or fastening. 3. Securely integrate into the pulling or lifting mechanism according to load specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using stock sheet in environments exceeding its rated tensile or shear strength. | Always consult engineering drawings and load calculations to ensure the material's capacity is not exceeded. |
| Inadequate edge preparation or finishing leading to stress concentrations. | Smooth all edges and chamfer where necessary to prevent premature failure. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Structural components in lifting equipment, Reinforcement plates for towing systems, Custom fabricated rigging hardware.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||