Engineered for robust pulling and lifting applications, this Aluminum 6061 stock sheet offers a superior strength-to-weight ratio. Its precise dimensions ensure reliable performance in critical industrial settings.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.378" |
| Length | 37" |
| Width | 14" |
Trusted by engineers across multiple sectors, this Aluminum 6061 stock sheet, with a thickness of 0.378 inches, a length of 37 inches, and a width of 14 inches, represents a prime choice for high-performance pulling and lifting systems. Aluminum 6061 is a precipitation-hardened alloy, renowned for its excellent corrosion resistance, good weldability, and high mechanical strength. This combination makes it ideal for applications where weight reduction is crucial without compromising structural integrity, such as custom rigging components, support structures for hoists, or specialized lifting frames.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and integrity before use. 2. Ensure all mounting hardware is compatible with Aluminum 6061 and rated for the intended load. 3. Securely fasten the sheet according to design specifications, considering load distribution and potential stress points.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using non-compatible fasteners that could lead to galvanic corrosion. | Employ stainless steel or similarly rated fasteners to prevent galvanic corrosion when in contact with Aluminum 6061. |
| Over-tightening fasteners, which can cause deformation or localized stress concentration. | Tighten fasteners to the recommended torque specifications for Aluminum 6061 to avoid material damage. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Custom rigging and hardware for cranes, Lightweight support structures for winches, Components for specialized lifting jigs and fixtures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||