This 0.400" thick Aluminum 6061 stock sheet, measuring 47" x 30", is precisely engineered for demanding pressure and temperature control systems, offering superior strength and thermal conductivity.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.400" |
| Length | 47" |
| Width | 30" |
Engineered for reliability and performance, this Aluminum 6061 stock sheet boasts a thickness of 0.400 inches, a length of 47 inches, and a width of 30 inches. Aluminum 6061 is a precipitation-hardened alloy known for its excellent corrosion resistance, good weldability, and high strength-to-weight ratio, making it ideal for critical components in pressure vessels, heat exchangers, and control manifolds where thermal management and structural integrity are paramount. Its formability allows for complex component fabrication.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of contaminants. 2. Accurately cut the sheet to the required dimensions using appropriate machining techniques. 3. Fabricate and assemble components according to design specifications, ensuring proper sealing for pressure containment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to burrs and dimensional inaccuracies. | Employ sharp, high-quality cutting tools specifically designed for aluminum alloys and maintain proper feed rates to minimize burr formation. |
| Inadequate surface preparation before assembly or welding, compromising joint integrity. | Thoroughly clean all mating surfaces with an appropriate solvent to remove oils, oxides, and other surface contaminants prior to assembly or welding. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Pressure vessel fabrication, Heat exchanger components, Temperature control manifold construction.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||