This 0.728" thick Aluminum 6061 stock sheet offers exceptional strength-to-weight ratio and corrosion resistance. Precisely manufactured for demanding industrial applications, it's a critical component in pressure and temperature control systems.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.728" |
| Length | 40" |
| Width | 16" |
Specified by design engineers worldwide, this Aluminum 6061 stock sheet is fabricated to exacting tolerances with a thickness of 0.728 inches, a length of 40 inches, and a width of 16 inches. As a T6 temper alloy, it exhibits excellent mechanical properties, including high tensile strength and yield strength, making it suitable for components subjected to moderate to high stresses. Its inherent corrosion resistance ensures longevity in diverse environmental conditions, crucial for pressure vessel fabrication, heat exchanger components, and thermal management systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free from debris. 2. Apply appropriate sealant or gasket material as per system design specifications. 3. Securely fasten the sheet using recommended fasteners and torque values.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using non-compatible fasteners that can lead to galvanic corrosion. | Always use fasteners made from compatible materials, such as stainless steel or anodized aluminum, to prevent galvanic corrosion. |
| Improperly supporting the sheet during handling, leading to deformation. | Utilize appropriate lifting and support equipment to prevent bending or damage to the sheet during transport and installation. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Pressure vessel construction, Heat exchanger plates, Thermal management components, Custom manifold fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||