This Aluminum 6061 stock sheet is a critical component for pressure and temperature control systems. Its robust material properties ensure reliability and longevity in demanding industrial environments.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.425" |
| Length | 40" |
| Width | 21" |
Specified by design engineers worldwide, this Aluminum 6061 stock sheet offers a nominal thickness of 0.425 inches, a length of 40 inches, and a width of 21 inches. Composed of a heat-treatable aluminum alloy with magnesium and silicon, it provides excellent strength-to-weight ratio, superior corrosion resistance, and good weldability. This material is engineered for optimal performance in applications requiring precise pressure regulation and efficient thermal management.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of debris before fabrication. 2. Machine to precise dimensions according to system schematics. 3. Integrate securely into the pressure or temperature control assembly, adhering to relevant ASME or ASTM standards for connections.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect sheet thickness for the intended pressure rating. | Always verify the required thickness against the maximum operating pressure and relevant design codes (e.g., ASME Boiler and Pressure Vessel Code). |
| Inadequate surface preparation leading to poor sealing. | Thoroughly clean and deburr all edges and mating surfaces prior to assembly to ensure leak-tight performance. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Pressure vessel fabrication, Heat exchanger components, Thermal management systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||