This robust Aluminum 6061 stock sheet provides exceptional strength and corrosion resistance, making it a superior choice for custom fabrication in plumbing and janitorial environments.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.122" |
| Length | 29" |
| Width | 35" |
Manufactured under strict quality controls, this 0.122-inch thick Aluminum 6061 stock sheet measures 29 inches in length and 35 inches in width. Aluminum 6061 is a precipitation-hardened alloy, offering a superb combination of strength, weldability, and corrosion resistance, essential for long-term performance in damp or chemical-exposed settings. Its versatility allows for easy machining and forming, enabling precise custom solutions for specialized plumbing fixtures, containment units, and structural components within janitorial infrastructure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark the sheet according to precise fabrication requirements. 2. Utilize appropriate cutting tools (e.g., abrasive cut-off saw, plasma cutter) for clean and accurate separation. 3. Employ suitable joining methods (e.g., welding, riveting, mechanical fastening) adhering to best practices for Aluminum 6061.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to burrs or material deformation. | Employ high-speed steel blades or diamond-tipped saws designed for aluminum, ensuring proper feed rates to prevent overheating and damage. |
| Inadequate surface preparation before joining, resulting in weak or compromised welds. | Thoroughly clean the joint area with a degreaser and wire brush to remove oxides and contaminants immediately prior to welding or bonding. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Custom fabricated pipe supports and hangers, Corrosion-resistant containment trays and sumps, Specialized brackets for janitorial equipment mounting.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||