This 0.901" thick Aluminum 6061 stock sheet, measuring 23" x 34", is engineered for demanding pulling and lifting applications. Its excellent strength-to-weight ratio and corrosion resistance make it an ideal component.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.901" |
| Length | 23" |
| Width | 34" |
Manufactured under strict quality controls, this Aluminum 6061-T6 stock sheet exhibits a minimum tensile strength of 45,000 psi and a yield strength of 40,000 psi. The precise dimensions of 0.901" thickness, 23" length, and 34" width ensure consistent performance and reliability in structural components for marine hardware, aircraft structures, and custom fabrication where lightweight durability is paramount. Its excellent weldability and formability facilitate integration into complex assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface for mounting is clean and free of debris. 2. Securely fasten the Aluminum 6061 sheet using appropriate hardware rated for the intended load capacity and material compatibility. 3. Verify all connections are tight and the sheet is properly aligned with the lifting or pulling mechanism.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using hardware not rated for the load or incompatible with aluminum. | Always select fasteners (bolts, screws, etc.) that are specifically rated for the anticipated load and are made from materials that will not cause galvanic corrosion with aluminum, such as stainless steel or aluminum alloys. |
| Over-tightening fasteners, which can deform the aluminum sheet. | Use a torque wrench to apply the manufacturer-recommended torque specifications for the chosen fasteners to prevent over-compression and potential structural compromise of the sheet. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Custom lifting fixtures, Heavy-duty pull tabs, Structural components in lifting equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||