This Aluminum 6061 stock sheet provides a robust foundation for hydraulic system components. Its superior strength-to-weight ratio and excellent corrosion resistance ensure longevity and reliable performance in demanding environments.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.283" |
| Length | 14" |
| Width | 45" |
Built to exacting engineering tolerances, this Aluminum 6061 stock sheet measures 0.283 inches thick, 14 inches wide, and 45 inches long. Composed of a precipitation-hardened aluminum-magnesium-silicon alloy, 6061 exhibits exceptional strength, moderate to high fatigue strength, and excellent corrosion resistance, particularly in marine environments. Its inherent machinability allows for precise fabrication of complex hydraulic manifold blocks, valve bodies, pump housings, and structural elements within hydraulic power units, ensuring optimal fluid flow and component integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect sheet for any surface defects or dimensional deviations. 2. Precisely cut to required component dimensions using appropriate machining techniques. 3. Deburr all edges to prevent stress risers and facilitate assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting leading to burrs or material stress. | Utilize sharp, high-quality cutting tools and appropriate feed rates to minimize burr formation and material distortion. |
| Ignoring material properties during design of mating components. | Factor in Aluminum 6061's thermal expansion coefficient and yield strength when designing adjacent parts to prevent overstressing or component failure. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Hydraulic Manifold Blocks, Valve Bodies, Pump Housings, Hydraulic System Structures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||