This Aluminum 6061 stock sheet offers superior strength and corrosion resistance for your critical pulling and lifting applications. Its robust composition ensures reliability under load.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.095" |
| Length | 26" |
| Width | 13" |
Manufactured under strict quality controls, this Aluminum 6061 stock sheet features a precise thickness of 0.095 inches, a length of 26 inches, and a width of 13 inches. Aluminum 6061 is a precipitation-hardened aluminum alloy with excellent corrosion resistance, good strength, and excellent weldability. Its mechanical properties make it a preferred choice for structural components where high strength-to-weight ratio is essential, such as in marine, automotive, and aerospace industries, as well as for custom fabrications in pulling and lifting equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the area is clean and free of debris. 2. Position the sheet according to design specifications. 3. Secure the sheet using appropriate fasteners and methods as per application requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect fasteners for the application. | Select fasteners rated for the expected load and compatible with aluminum 6061 to prevent galvanic corrosion. |
| Over-stressing the material beyond its yield strength. | Carefully calculate and adhere to load limits and stress calculations based on the material's properties and the application's demands. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Custom brackets for lifting gear, Reinforcement plates for pulling mechanisms, Lightweight structural components in material handling equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||