This robust Aluminum 6061 stock sheet is engineered for superior strength and durability in demanding pulling and lifting applications. Its substantial thickness and precise dimensions ensure reliable performance under stress.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.636" |
| Length | 17" |
| Width | 26" |
Engineered for reliability and performance, this Aluminum 6061 stock sheet boasts a precise thickness of 0.636 inches, a length of 17 inches, and a width of 26 inches. Crafted from the widely recognized 6061 alloy, it offers an excellent balance of high strength, good corrosion resistance, and weldability. This makes it an ideal substrate for fabrication of custom pulling and lifting equipment, structural components for material handling systems, and robust supports in marine or industrial environments where weight-conscious design is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions against project requirements. 2. Prepare mounting surfaces with appropriate cleaning and surface preparation techniques. 3. Securely fasten the sheet using recommended hardware and methods for the intended load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect fasteners that compromise structural integrity. | Utilize high-strength, corrosion-resistant fasteners (e.g., stainless steel) specifically rated for the anticipated loads. |
| Insufficient surface preparation leading to poor adhesion or corrosion. | Thoroughly clean and degrease the mounting surfaces before installation to ensure optimal contact and longevity. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Custom pulling apparatus fabrication, Reinforced lifting points and brackets, Material handling equipment components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||